Products Overview
This connector sets machined pins in tight pitch. It links signals on boards. Contacts use metal blend. Case bears heat. Users grab it for precise fits. Machined type adds strength. Pitch stays narrow. It works in dense gear. We build unique ones. Choices cover gold coat for less wear. All heed RoHS. Quiz us on rules in zones.
Description specifications
|
Power Peak |
2A, matches light loads in tools |
|
Block Pull |
Over 1000M ohms, cuts shorts in damp spots |
|
Volt Bear |
500V AC, from basic trials |
|
Touch Pull |
Below 20m ohms, smooths flow |
|
Warm Reach |
-40°C to +105°C; some top +125°C but view yours |
|
Coat Form |
Tin base; gold over nickel for tough hold |
|
Make Pieces |
Brass sleeve; UL94 V-0 case for burn block |
|
Space Length |
1.778mm gap, for machined pins |
Description Points
This connector machines pins for sure grip. It suits high cycle use. Machined build lasts over 1000 plugs. Mating pin fits 0.45mm. Custom lengths match needs. Ends aid place. Narrow pitch packs room. It takes shakes in portables. We adjust totals. Think it as a strong tie for paths.
Sleeve uses brass for pass. Case halts fire. Safe mark stops spread. Gap is 1.778mm. Outlines on need. Pin sums change. Mating size like 0.45mm is normal but scan yours.
Products Roles
This serves PCBs. Tools need it for precision. Sockets use it in frames. Electronics gain from tight holds. Test gear fits well. Wire items handle it. Industrials rely on it. Auto parts use close kinds.
We go by RoHS for pure build. Case owns UL94 V-0. Guard matters in gear.
Order runs easy. Take free tests. Pass wants for special. Write ron.ye@126.com. WhatsApp +8613902450680. Or WeChat. Our spot in Shenzhen carries connector know. We view each part.
Specifications:
Insulator: PPS
Fiammability: UL 94V-0
Sleeve: Brass
Mating pin ∅: 0.45 mm
Mechanical life: min 500 cycles
Rated cument: 1A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000V RMS
SPECIFICATION
Current Rating: 3 Amp
Insulation Resistance: 1000M ohms min
Contact Resistance: 20M ohms max
Dielectric Withstanding: AC500V
Operating Temperature: -65°C to +125°C
Contact Material: Brass
Insulator Material: PBT,UL 94V-0 Black
FAQ
Q: What's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Q: How long is your delivery time?
A: A: The general delivery time is 30-45 days after receiving your order confirmation. Anther, if we have the goods in stock, it will only take 1-2 days.
Q: Do you provide sample ? Is it free?
A: A: If the sample is low value, we will provide the free sample with freight collect. But for some high value samples, we need to collect the sample charge.
Q: What is your term of payment?
A: 30% down payment before producing and 70% balance payment before shipping.
Q: Which payment form you can accept?
A: T/T, Western Union, PayPal etc. We accept any convenient and swift payment term.
Hot Tags: 1.778mm pitch machined pin header, China 1.778mm pitch machined pin header manufacturers, suppliers, factory, 1.778mm pin header, 1 778mm pin header
