Products Introduction

This is a DIN 41612 30-pin connector, a male (M-type) connector, with a 3-row design and right-angle terminal type.

Main Functions:

Enables reliable electrical interconnection for high-density board-to-board or board-to-backplane connections.
Supports signal transmission and certain power requirements.
Modular design facilitates expansion and maintenance of Eurocard/19-inch rack systems.
Provides good mechanical strength and electrical stability, suitable for industrial applications.

Product Specifications

Power Crest	0.5A to 1A, aligns with light tugs in machines
Block TugAbove 500M ohms, blocks slides in wet places	Above 500M ohms, blocks slides in wet places
Volt Cling	300V to 500V AC, from regular probes
Touch Tug	Under 20m ohms, aids clean shift
Warm Stretch	-40°C to +105°C; some peak +125°C but eye yours
Film Shape	Tin root; gold flash for firm use
Form Units	Brass contacts; UL94 V-0 shell for blaze check
Room Span	0.8mm hole, double row for pack sets

Application Scenarios

The DIN 41612 series is a classic European standard backplane connector, primarily used in:

Telecommunications and communication equipment: signal control panels, VDSL/DSL modules, backplane systems.
Industrial automation: PLCs, industrial PCs (IPCs), control cabinets, automation equipment.
Test and measurement instruments.
Railway signaling systems and transportation equipment.
Eurocard 19-inch rack systems: modular electronic equipment such as VMEbus and NuBus.
Medical equipment, instruments, and other applications requiring high-reliability modular connections.

The 30-pin version is suitable

An example of a 0.8mm dual-row SMT pin header used in communication modules or IoT devices demonstrates its advantage in achieving high-density connectivity in limited space.

Product Features:

• Primarily used for board-to-board stacking or board-to-FPC connections.

• Suitable for high-volume automated production in SMT placement.

• A 0.8mm pitch strikes a balance between density and assembly difficulty, commonly used in designs requiring further size reduction.

If you need:

• Schematic diagrams for specific pin counts (e.g., 2x20, 2x30)

• Complete mating stacking diagram with the female connector

• Photos of the actual product used in medical devices or communication modules

• Or comparison images with the 1.27mm/0.5mm series

Please tell me more details, and I can provide you with more precise images!

Technical Documents and Other Information

Certifications: RoHS, REACH, UL94V-0; the company holds IATF16949 (automotive grade quality), ISO 9001, and other certifications.
Customization: Supports different pin counts, plating options (tin/gold), height adjustment, etc.
Samples: Free samples are available (maximum 20pcs, shipping costs not included).
Packaging: Supports Tray, Bag, Tube, Tape & Reel, suitable for automated production.
Contact: Email: ron.ye@126.com; WhatsApp/WeChat: +8613902450680.

Precautions:

This is an SMT product. Strict control of reflow soldering temperature profile, PCB flatness, and placement accuracy is required during installation to avoid short circuits or misalignment caused by fine spacing.
With a lower current capacity (0.5A~1A), it is primarily suitable for signal transmission; for higher current requirements, the 1.27mm or larger pitch series is recommended.
Compared to the previously searched 0.35mm/0.4mm/1.27mm series, this 0.8mm pitch achieves a better balance between density and mechanical strength, and is more cost-effective and easier to assemble.

The following are 2D drawings